INTERIOR CUSTOMISATION
There are some solutions inside the 5000 series.
INTERNAL GLUED SIDE

SMOOTH
Smooth inner panel without frame
(available on request)

DOUBLE
Interior panel decorated with the same exterior design with a 3mm thick sheet of metal inside.
(available on request)
INTERNAL INSERTED SIDE

SMOOTH
Smooth interior panel with matching frame
(standard solution)

SMOOTH
Smooth inner panel with anodised aluminium frame
(standard solution)

SMOOTH
Smooth inner panel with frame in a different colour the panel. Other finishes with reference to DFV colour charts
(available on request)

SMOOTH
Smooth inner panel without frame
(available on request)
TECHNICAL FEATURES
A 3 mm thick aluminum sheet
B Elastic joint
C Insulating core
D Aluminum sheet for internal side
E Decorative engraving on aluminum sheet obtained by pantographing 6 mm wide
F Decorative engraving on aluminum sheet with application of aluminum insert with satin silver or stainless steel finish 5 mm wide

AVAILABLE MEASURES
The panels are cut to size as indicated in the orders. The dimensions, regardless of the type applied or inserted, are divided into 3 formats.
SMALL
Maximum size: 550×2290 mm
(suitable for secondary leaves or small mirrors)
MEDIUM
Maximum size: 1200×2290 mm
(standard reference measurement)
LARGE
Maximum size: 1500×3000 mm
(panels beyond the standard dimensions)
THICKNESS AVAILABLE

STANDARD THICKNESSES FOR SMOOTH INTERNAL SIDE PANEL
METHOD OF APPLICATION AND REPLACEMENT OF GLASS
All our panels, in the version with glass, are supplied as standard with the internal glass-stop frame and arranged for glass.
If you choose the panel with a glass of our series and finish, this will be supplied with the glass and the internal frame already assembled.
Below is the procedure for installing and / or replacing glass.

STEP 1
Remove the glazing bead gasket.

STEP 2
Use the dedicated key to unlock the fixings and remove the glass.

STEP 3
Reposition the new glass, reapply the frame and restore the fixings.
CONSTRAINTS AND DETAILS
PAINTING: All panels can be painted internally and externally in the same color or with different colors. Those painted with wood effect will have the direction of the veins arranged vertically with respect to the panel.
DECORATIVE AREA POSITIONING: The decorative area is the characterizing part of the panel and is obtained by engraving on the internal or external surface. The dimensions indicated in the drawings of the various models define the positioning of the decorative area with respect to the perimeter of the panel and remain constant as the width L and height H vary.
The engravings highlighted in red in the drawings provide for the possibility of applying inserts.
Here are 3 examples of different models where you can see how the con fi guration of the decorative area changes as the width L and the height H change.



POSITIONING OF THE DECORATIVE AREA FOR EACH INDIVIDUAL MODEL